Updated Articles

  1. Update to PHP7

    When updating to VDV2018 you need to configure the Internet Informational Services (IIS) to use PHP7 instead of PHP5.2: For VDV2018 and PHP7 to operate, the Visual C++ Redistributable for Visual Studio 2015 needs to be installed. Download and ex...
  2. Update to VDV2018

    VDV2018 supports latest version of Interner Explorer 11 which was released in 2013. Older versions of Internet Explorer (IE 6,7,8,9,10) are not supported as they are no longer supported by Microsoft. For best experience we recommend latest version ...
  3. Alarm Setup

    Alarms are a powerful feature that simplifies the operation of a network of dataloggers and eases the workload of the operators. Setting up alarms simple. Before setting up alarms a Contact has to be created and which is then assigned to a Cont...
  4. Converting SAA data to a VDV compatable format

  5. Alarm Limits

    It is simple to display the Alarm Limit for Variables.  The Alarm Limits are shown as horizontal lines on the graph, lowlow & highhigh are red and  low&high are yellow . Only one variable on the graph can have this option...
  6. Alarm Limits on Graphs

  7. Step 4

    Take a look at the Basic Configuration for the web interface.  http://help.vistadatavision.com/help/change-variable-names-and-assign-units ...
  8.  Import Sensor Data File

    In this chapter we are going to import our sensor data file and create few Graphs.  If you have data from another datalogger then Campbell SCI you need to take close look at step number 1 regarding the VDV File Converter. Open db.rob...
  9. Create a Contact and a Contact Group

    Contacts are assigned to a Contact Group and are used to send out email notifications. One or multiple Contacts can be in each Contact Group and the same Contact can be in multiple Contact Groups. Create a Contact Go to Setup > Con...
  10. Create a Contact and a Contact Group